Are you making provisions for a new network, or trying to revamp your existing one? Are the dead spots at your place causing you a concern while you use your wireless devices across your home? Netgear extender setup

The Netgear Wi-Fi range extenders such as Nighthawk EX7000Ex6100, Netgear Extender Setup etc. boost up your existing Wi-Fi network and string out to the hard-to-reach spots.

The Netgear Wi-Fi range extenders are avant-garde devices which have been crafted with years of research and development across the United States Of America. With hand-held devices being the inseparable parts of our lives such as our smartphones, tablets, and other mobile devices, a splendid Wi-Fi connection is a must have.

If you are looking for a splendid internet speed at your place and want to enjoy it in every room of your house, the Netgear extenders are a powerful tool for it. As the name manifests, these extenders pick the existing Wi-Fi signals from the main access point (router) and amplifies for an enhanced network connectivity.

A perpetual Wi-Fi network today is a mandatory part of our daily lives. With most of our task such as shopping, banking or research being driven by the internet, it is important to have a uniform and powerful Wi-Fi access across your house. With the help of logging in to, not only you can monitor your network, you can also keep a check on the internet speed you are getting from your network service provider.

So, if you have solid concrete walls at your place which block the Wi-Fi signals from your router or you get uneven signals on different floors of your house, simply plug the Netgear range extender and prevent your wireless devices from dropping off your network.

Gone are the days when people used to spend money on paying for hefty service packages. You can pick from the cost-efficient extenders such as WN2000 RP, WN3000 RP, WN2500 RP or EX6100 and enjoy a magnificent network speed.


What Do You Mean By ?

The setup is an automated configuration page which lets you connect your newly bought Netgear range extender to your existing network. Once you un-box your extender and plug it to the power outlet, wait for the extender to boot up. When the power light goes green log on to and follow the simple instructions to configure your extender in a few seconds.

It is the local address rather than the web address to explore the configurations of your home Wi-Fi.

Along with the Netgear extender setup, here is a list of provinces possible with the setup page:

You can easily perform Mac cloning with
Perform port forwarding and port triggering.
Upgrade your router and extender firmware to instantly step-up the network speed.
Keep a check on the connected devices on your network.
Perform speed test to track the uploading and downloading speed.
Change network passwords, if required.
Resolve multiple port opening issues on PlayStation and other gaming devices.

How To Connect To

  1. First of all, plug the extender to a power outlet. Remember to place it as close as possible to the main router.
  2. On your computer, open a browser. You will be automatically taken to the setup page where you can set-up you extender by following a few easy steps.
  3. If not, go to the address bar of your browser(where you have the URLs written (such as and type in
  4. Now, you will be asked for a user name and password.

    If you have not changed these credentials, use the default ones which are:

    USERNAME: admin
    PASSWORD: password
    Simply follow the easy instructions and you will be able to put your range extender up and running.

How can you say it is ready to connect to

Simply look for atleast 1 solid green light on your extender, probably the power light. That’s when it is all set to be connected.

How do I know that the range extender has been configured?

All solid green lights mean the Netgear extender Setup has been successfully configured.

Unable To Connect To Netgear extender Setup Page?

If the error messages pops up and you are unable to go to, look out for the following:

  1. Make sure that the power light on the extender is a solid green (in case of ex6100 or higher models of Netgear extenders, see that the “Netgear” logo is lit up).
  2. Put the range extender in the same room as your router.
  3. See that there are no wires connecting to your extender from your router or your computer.
  4. Unplug the extender for 30 seconds, and plug it back in. Once the extender is powered up, repeat the steps mentioned above.

A Standard Guide For Setting Up Extenders

Netgear Wi-Fi range extenders are plug and play network appliances. All you need to do is plug in the extender to the wall and login to From here, you are directed to the setup where you can configure your range extender within a few steps.

Generally, there are two standard ways of hooking up the wireless extender to an existing network:

  1. Through WPS (Wi-Fi Protected Setup), or
  2. Manually through setup

Let’s discuss these two methods briefly:

The WPS or The Wi-Fi Protected Setup

The WPS way of setting up a wireless range extender requires the WPS feature on both your router as well as your Netgear extender. Except the WN1000 RP, all models of Netgear extender have the WPS dexterity.

Check out the list of Netgear extenders which have the WPS button:Netgear ex7000, Netgear ex6920, Netgear ex6200, Netgear ex6100, Netgear ex3920, Netgear ex3800, Netgear ex2700, Netgear WN 3000RPV3, Netgear WN3000RPV1, Netgear WN2500RP, Netgear WN2000RPTV3, Netgear ex6150

WPS is the easiest possible way to setting up a connection. Here is how you can do it:

  1. Plug the extender in a power outlet as close as possible to the main router(less than 3 feet).
  2. Now, simultaneously press the WPS button on the router and the extender.
  3. You will see a blinking LED on both your router as well as the extender.
  4. Within a minute, you will have 3 solid green lights on your extender.
  5. Your extender is configured now. You may access or any other website to verify that the extender is up and running.

The WPS button activates the router to search out for authorized nearby devices which is your extender in this case. The process does not involve any other complications and the extender automatically picks up the original settings from the router network and copy the same on its firmware.

The best part about the WPS setup is that you do not have to manually login to and type in the wireless passwords. You do not require to manually input your wireless password.

Manually Through Setup Page

There might be chances that you are unable to configure your range extender through the WPS way.

So, we will have to perform the manual setup. And here is how you can do it:

  1. Plug the extender to the power source and wait for it to boot up.
  2. On your computer, smartphone or tablet, you will see a new Wi-Fi network as: ‘NETGEAR_EXT’. Select this network and open up a web browser.
  3. You will be directed to the setup page. If not, go to the address bar and type in or Netgear extender setup.
  4. Here, you will be asked for a username and password. Use admin for username and password for password.
  5. Now, you will see that you are directed to the Genie smart setup page, which is the page. Here you will be asked a few questions to register your account with Netgear.
  6. Once you have registered successfully, you will see a list of network available.
  7. Choose your home network and select ‘continue’.
  8. You will be asked for a password or the network key. This is the same as you use to connect your wireless devices to your home network.
    Important: passwords are case sensitive, so make sure you type in the right password.
  9. In the next step, simply click on the skip option. Finally, check mark the option which says “use the same security mode and password as those for the existing network”.
  10. Congratulations, your Netgear extender Setup has been configured. You can unplug it and place it where you have weak Wi-Fi signals.

The modules mentioned above will help you configure your Wi-Fi range extender to your existing network and make it a plug-and-play device for future use.

However, there might be chances that you would find it quite a task to get your extender running. Do not worry. You can always call up on 1-888-914-8918 or visit and get in touch with certified network technicians and get your extender configured easily

There are some common troubleshooting which you may perform for accessing such as:

  1. Check for any loose cables
  2. Place the extender closer to the router
  3. Make sure you are using the right password

Yet, there are times when some network settings have to be looked into and altered so that the extender may talk to the router and the overall network is unaffected. Some of the common issues related with setting up a Wi-Fi extender include:

  1. Finding the basic installation challenging
  2. Router keeps dropping the setup page
  3. Weak Wi-Fi signals unable to reach the extender
  4. Extender says network not secure
  5. says page not available
  6. Issues with extender firmware
  7. Unable to access the homepage
  8. Web page says password incorrect

For any kinds of technical glitches as the ones mentioned above or otherwise, simply reach us out at 1-888-914-8918 and get in touch with a certified network personnel. Our competent technicians will ensure that the issues are dealt within a single call and you are able to enjoy your amplified Wi-Fi signals across your home. You can give a call on our toll-free number 1-888-914-8918 or reach us at and get yourself a personal technician.

Here is a list of services you can avail by connecting to a certified technician:

The Netgear Wi-Fi

What to Do When Unable to access Netgear extender setup ?

Internet access is something we rely on for our everyday needs. So, if the network is unable to perform, you cannot wait for a technician to fix things up. Instead of getting into the fuss and dealing with it all by yourself, you can simply give a call at 1-888-914-8918 and directly speak with a certified technician. This will not only help you to access, but will also ensure that you do not mess up the entire network.


With the technician help and trying to connect to, you can always see for yourself that how he is able to resolve the glitches. While the technician configures your range extender, you may try placing the extender at the best possible location and ask the technician for the same.


Now, you might have some computer repair services nearby your location. But most of the times, these are the hardware repair shops rather than the networking personnel. Most of the times, they ask for a hefty amount of money to get things fixed. Instead, you can give a call and get a free diagnosis and extender installation through by a certified tech.


It takes a level of certification and authorization for providing services for Netgear extender Setup. Services are driven by clients satisfaction and know all the possibilities when reaching out the setup page becomes troublesome. While the technician works on your network, you can sit back and relax or share any other problems you might be facing with your devices.


Being an existing customer of Netgear entitles you for services and assistance for setting up your Wi-Fi range extender. This means you do not have to pay for any kinds of diagnosis or setting up your extender.


Taking your router or computer to a local store means physically carrying the devices to-and-fro. This is not at all necessary. Simply give a call at the toll-free number 1-888-914-8918 and get the issues fixed at your place itself.

Our Clients

Flexible Services And Assistance Sessions

You get extender services when you want it. Depending upon your convenience, you can call the technicians at the toll free number 1-888-914-8918 and book yourself a time slot whenever you want a techie to reach you back. You can do it in the afternoon or even on the weekends. We will let you cherish a flexible support system with a certified network technician.

Network Setup NDA Agreements

We understand and respect your privacy. This is the reason that there is a proper contractual assessment performed while a technician connects with you and sign up your range extender to Along with the extender setup, you can also let technician know of other issues you might be facing and it would also be diagnosed free of charges.


About Us

Network Routers and Wi-Fi range extenders are amazing devices which let us reach out the web through our wired as well as wireless appliances. Today, we cannot imagine our lives without a hassle-free internet access at our places.

And with the help of the avant-garde Netgear Wi-Fi boosters, you can enjoy a seamless connection throughout your home.

Getting a Netgear extender setup to work is as simple as plug & play. All you need to do is unbox your range extender, connect to (Netgear extenders etup) and that’s it. Once configured, you may place the extender where you want to boost the Wi-Fi signals and connect any wireless device to it. The best part about the Netgear extenders is that you do not have to configure it again and again while you move it around your house.

Yet, there are times when the extender doesn’t login to setup page due to some network slipups. It might be the firewall settings or the general network access protocol that prevent the range extender from making a connection.

So, What To Do If does not work?

If you find yourself in the dilemma of unable to get your extender up and running(while you have followed all the steps precisely), do not worry.

You can simply give a call at our toll-free number 1-888-914-8918 and talk to a certified technician in real-time. Our technician will assist you in letting your extender connect to and get your extender operative in full swing.

Got A Question? Ask The Experts Right Away!

We are the certified networking professionals who are well versed with the nuts and bolts of range extenders and routers. With a significant experience up our sleeves, we take pride in letting people get rid of the domestic networking challenges. We have a 100% record of fixing the Wi-Fi complications such as connecting to on a single call.

All you need to do is give a call and a technician will connect with you remotely. You can share all your glitches you might be facing and you can see the technician working live on your network. Call us at 1-888-914-8918 and get on-the-spot solutions for your queries about netgear extender setup.

Check out the list of Netgear extenders which have the WPS button:

Netgear ex7000, Netgear ex6920, Netgear ex6200, Netgear ex6100, Netgear ex3920, Netgear ex3800, Netgear ex2700, Netgear WN 3000RPV3, Netgear WN3000RPV1, Netgear WN2500RP, Netgear WN2000RPTV3, Netgear ex6150, Netgear extender setup.